Water Damage Restoration in Union, OR Done by the Book
An ice-maker line split behind the fridge, and by morning the water had run under the cabinets, across the kitchen, and into the dining room hardwood. That's a restoration job: extraction, drying, cleaning, contents, and rebuild, all in the right order. One call to Water Damage Aldine routes you to an independent Union restoration contractor who handles each stage from start to finish.
Free referral. No obligation.

- Drying goals set from day-one readings
- Furniture and belongings protected
- Insurance-ready estimate and photo log
Why Choose Our Specialized Water Damage Restoration in Union, OR
Restoration isn't one task; it's a project with five or six moving parts. The difference between a clean claim and a mess usually comes down to documentation and sequencing.

Restoration Equipment on Board
Restoration contractors carry LGR dehumidifiers, axial and centrifugal air movers, hydroxyl or HEPA air scrubbers, and thermo-hygrometers. That gear lets them control the drying environment instead of hoping it dries.
Licensed, Insured & Independent
We connect you with licensed and insured independent contractors, many of whom follow the IICRC S500 standard for water damage restoration. Ask about their training and verify credentials before work begins.
Estimates Your Adjuster Recognizes
A lot of restoration pros estimate in Xactimate, which most carriers already use. That means fewer line-item disputes and a faster approval.
Round-the-Clock Local Dispatch
Every hour of delay lets water travel further into framing and flooring. We route your call to a nearby available restorer at any hour.
Every Phase of Water Damage Restoration Covered
Here's how a complete restoration job breaks down.
Inspection & Moisture Mapping
The restorer identifies the water source, its category, and its class, then maps every wet material on a floor plan. Every later reading is compared against that baseline.
Controlled Psychrometric Drying
Restorers track temperature, humidity, and grains per pound to keep the air pulling moisture out of materials. Dehumidifiers and air movers are adjusted daily until materials reach their drying goal.
Contents Pack-Out & Protection
Furniture legs get foam blocks, and belongings can be inventoried and moved off-site. A photo inventory backs up your contents claim.
Cleaning & Antimicrobial Treatment
Wet surfaces are cleaned and treated with an EPA-registered antimicrobial before mold can get a foothold. HEPA scrubbers help control dust and odor while work continues.
Reconstruction & Final Clearance
Once materials are confirmed dry, drywall, flooring, cabinetry, and trim are rebuilt. You get a closing drying report and a walk-through at the end.

Let One Call Start the Whole Restoration
Reach an independent restoration contractor near Union now.
How Water Damage Restoration Works
Most restorations run about a week from first call to rebuild start. Here's how it unfolds.
Call the Restoration Line
Call +1-877-637-9008 and describe the source, the rooms affected, and when it started. Let them know if you've opened a claim so documentation starts at the door.
Restorer Arrives & Stabilizes
A nearby restorer shows up, halts the spread, and begins pulling water. Contents are moved or blocked up right away.
Scope, Photos & Estimate
The restorer builds a written estimate around the moisture map and photos. Nothing beyond emergency stabilization happens without your approval.
Dry, Clean & Rebuild
Daily monitoring continues until every material hits its goal, then reconstruction begins. A closing report documents the whole process.

What Restoration Customers Tell Us
These jobs all involved more than one room and more than one trade.

Our ice-maker line flooded the kitchen and seeped into the dining room hardwood. They mapped every wet spot on day one and came back daily with readings. We were back to normal in under two weeks.
— Rachel D., UnionI didn't know restorers used the same estimating program as my insurer. My adjuster accepted nearly every line item.
— Stephen W., UnionMy grandmother's china was inventoried and packed out before they turned on a single fan. Nothing was lost or broken.
— Yolanda B., UnionWater Damage Restoration Questions, Answered
What's the difference between water damage restoration and mitigation?
Mitigation is the emergency work that stops damage from getting worse: extraction, drying, and controlled tear-out. Restoration covers that plus the cleaning, contents care, and reconstruction that return the property to its pre-loss condition.
What is the IICRC S500 standard?
The S500 is the industry's standard of care for professional water damage restoration. It covers water categories and classes, drying procedures, safety, and documentation, and many carriers expect restorers to follow it.
How long does Water Damage Restoration take?
Plan on three to five days of drying, then anywhere from a few days to several weeks of rebuild. Material lead times are usually the biggest variable.
Will my furniture and belongings be saved?
Solid wood, metal, and plastic items usually recover well. Porous items soaked in gray or black water are harder to save, and anything discarded gets photographed and listed.
Do I need to be home during the restoration?
You'll want to be there for the first visit and the walk-through. During daily monitoring visits, many homeowners arrange access instead of staying home.
Restoration Coverage Across Union
We take calls from houses, condos, and commercial spaces throughout Union. We work to route each one to an available independent restorer close by. Area zip codes include:
Don't see yours? Give us a call. New independent restorers join the network regularly.

